NonStop NS1000 Planning Guide (H06.06+)

What’s New in This Manual
HP Integrity NonStop NS1000 Planning Guide—542527-002
ix
New and Changed Information
Section 4, Integrity NonStop
NS1000 System Description
Added information about processor model under the
System Models on page 4-9.
Added statements under the System Models
on
page 4-9 indicating functionality is not supported for:
T1200 Fibre Channel to SCSI router (model
M8201R)
Connection to NonStop S-series I/O
Connection to NonStop ServerNet Clusters
Corrected the FCDM P, B, M, and MB references in
the illustration on page 4-11
to reflect the system load
paths described above the illustration.
Section 5, Modular System
Hardware
Added information about PDUs and HP extension
bars under Power Distribution Units (PDUs)
on
page 5-5.
Added component configuration restrictions when a
UPS is installed in the system under Blade Element
on
page 5-9.
Updated the descriptions for Front Panel Buttons and
Indicator LEDs on page 5-11 on an Integrity NonStop
NS1000 server.
Updated I/O Adapter Module (IOAM) Enclosure and
I/O Adapters on page 5-13 to note that in OSM, IOAM
power supplies have actions to configure the power
source as AC or UPS in case of power failure.
Updated Maintenance Switch (Ethernet)
on page 5-14
to note a connection to the optional UPS.
Added support for the Optional UPS and ERM
on
page 5-14.
Updated Blade Element Group-Module-Slot
Numbering on page 5-18 to reflect support for four
fans located in slots 16 through 19 of an Integrity
NonStop NS1000 server.
Section and Title Changes (page 2 of 3)