NonStop NS1000 Planning Guide (H06.06+)

What’s New in This Manual
HP Integrity NonStop NS1000 Planning Guide—542527-002
x
New and Changed Information
Section 6, System Configuration
Guidelines
Updated Enclosure Locations in Cabinets on page 6-3
to reflect supported component placement in the 42U
modular cabinet.
Removed references to the T1200 Fibre Channel to
SCSI router (model M8201R) under FCSA to Tape
Devices on page 6-9. This product is not supported by
Integrity NonStop NS1000 systems.
Added information about PDU Strapping
Configurations on page 6-23. PDUs are available in
four static strapping configurations.
Section 7, Example Configurations
Updated Maximum Number of Modular Components
on page 7-1 to include configuration information when
a UPS is installed in the system.
Added sample configuration descriptions and
illustrations for:
2-Processor System With UPS and ERM
on
page 7-7.
4-Processor System With UPS and ERM on
page 7-8.
6-Processor System With UPS and ERM
on
page 7-9.
8-Processor System With UPS and ERM on
page 7-10.
Appendix B, Control, Configuration,
and Maintenance Tools
Added support for the rackmounted HP R5500 XR
UPS under Dedicated Service LAN on page B-7.
Added information about the optional UPS including IP
addresses under IP Addresses
on page B-10.
Corrected the G4SA LIF values under G4SA LIF
on
page B-14.
Added information about AC Power Monitoring
on
page B-17.
Added information about AC Power-Fail States
on
page B-18.
Section and Title Changes (page 3 of 3)