NonStop NS1000 Planning Guide (H06.06+)

Control, Configuration, and Maintenance Tools
HP Integrity NonStop NS1000 Planning Guide—542527-002
B-10
IP Addresses
IP Addresses
Integrity NonStop NS1000 servers require Internet protocol (IP) addresses for these
components that are connected to the dedicated service LAN:
•
ServerNet switch boards in the IOAM enclosure
•
Maintenance switches
•
System consoles
•
G4SAs
•
UPSs (optional)
These components have default IP addresses that are preconfigured at the factory.
You must change these preconfigured IP addresses to addresses appropriate for the
LAN environment:
Component Location GMS
Default IP
Address Used By
IOAM enclosure N/A 100.2.14
100.3.14
192.231.36.222
192.231.36.223
OSM Low Level
Link
Maintenance switch
(ProCurve 2524)
Additional switches
(rackmounted only)
Rack 01
Rack 02
N/A
N/A
192.231.36.21
192.231.36.22
192.231.36.23,
192.231.36.24,
...
192.231.36.n
OSM Service
Connection
Primary system console
(rackmounted or stand-
alone)
Backup system console
(rackmounted only)
Up to two additional system
consoles (rackmounted
only)
N/A
N/A
N/A
N/A
N/A
N/A
192.231.36.1
192.231.36.4
192.231.36.5
192.231.36.6
OSM Low Level
Link
OSM Service
Connection
OSM
Notification
Director
UPS (rackmounted only)
UPS (not rackmounted)
Rack 01
Rack 02
Rack 03
N/A
N/A
N/A
192.231.36.31
192.231.36.32
192.231.36.33
192.72.173.188
OSM Service
Connection
TCP/IP processes for OSM:
$ZTCP0
$ZTCP1
First G4SA (port A)
Second G4SA (port A)
192.231.36.10
192.231.36.11
OSM Service
Connection
OSM
Notification
Director