NonStop NS1000 Planning Guide (H06.06+)

Modular System Hardware
HP Integrity NonStop NS1000 Planning Guide—542527-002
5-3
Modular Cabinets
Modular Cabinets
The modular cabinet is a 19-inch, 42 U high, rack for mounting modular components.
The modular cabinet comes equipped with front and rear doors and includes a rear
extension. The Power Distribution Units (PDUs) are mounted along the rear extension
without occupying any U-space in the cabinet. Depending on your power requirements,
these modular cabinet and PDU combinations are supported for installing the
components of an Integrity NonStop NS1000 server:
North America and Japan 208 V AC input, 3-phase delta, 24A
RMS Modular Cabinet
•
EIA standard 19-inch rack with 42U of rack space
•
Geography: North America and Japan
•
Recommended for most configurations
•
Includes 2 power distribution units (PDU)
°
Zero-U rack design
•
PDU input characteristics
°
208 V ac, 3-phase delta, 24A RMS, 4-wire
°
50/60Hz
°
NEMA L15-30 input plug
°
6.5 feet (2 m) attached power cord
•
PDU output characteristics
°
3 circuit-breaker-protected 13.86A load segments
°
36 AC receptacles per PDU (12 per segment) - IEC 320 C13 10A receptacle
type
°
3 AC receptacles per PDU (1 per segment) - IEC 320 C19 12A receptacle type
•
Includes front and rear doors
North America and Japan 200 to 240 V AC input, Single
phase, 40A RMS Modular Cabinet
•
EIA standard 19-inch rack with 42U of rack space
•
Geography: North American and Japan
•
Recommended for most configurations
Modular Cabinet Page
North America and Japan 208 V AC input, 3-phase delta, 24A RMS Modular Cabinet
5-3
North America and Japan 200 to 240 V AC input, Single phase, 40A RMS Modular
Cabinet
5-3
International 380 to 415 V AC input, 3-phase Wye, 16A RMS Modular Cabinet 5-4
International 200 to 240 V AC input, Single phase, 32A RMS Modular Cabinet 5-4
Note. If your system includes the optional rackmounted HP R5500 XR UPS, the modular
cabinet will have one PDU located on the rear left side and four extension bars on the rear right
side.