NonStop NS1000 Planning Guide (H06.06+)

Modular System Hardware
HP Integrity NonStop NS1000 Planning Guide—542527-002
5-11
Blade Element
HP Integrity rx2620 Server
The HP Integrity rx2620 server components are field-replaceable units (FRUs) that can
only be serviced by service providers trained by HP. The HP Integrity rx2620 server
FRUs are:
•
HP Integrity rx2620 server (all components excluding the fans and power supplies)
•
Redundant cooling fans (accessed from the top of the enclosure when the
enclosure is pulled forward on its rails)
•
Redundant 220-240 V ac power supplies and power cords (accessed from the
back of the enclosure)
Each HP Integrity rx2620 server, which is 2U high and weighs 46 pounds (25
kilograms), has these physical attributes:
•
Rackmountable
•
Redundant AC power feeds
•
Front-to-rear cooling
Front Panel Buttons and Indicator LEDs
This illustration shows the front panel of the HP Integrity rx2620 server:
This table describes front panel button and indicator LEDs for the preceding illustration:
Front
Panel
Illustration
Reference
Number
LED
Indicator State Meaning (page 1 of 2)
1 Locator
LED and
button
On/Off The locator button and LED are used to help locate
this server within a rack of servers.
When the button is engaged, the blue LED illuminates
and an additional blue LED on the rear panel of the
server illuminates.
2 Diagnostic
LEDs
On/Off The four diagnostic LEDs operate in conjunction with
the system LED to provide diagnostic information
about the system.
1
VST070.vsd
2 3 4 5 6