NonStop NS1000 Planning Guide (H06.07+)

Integrity NonStop NS1000 System Description

HP Integrity NonStop NS1000 Planning Guide—542527-003

4-13

System Installation Document Packet

To keep track of the hardware configuration, internal and external communications

cabling, IP addresses, and connect networks, assemble and retain as the systems

records an Installation Document Packet. This packet can include:

Tech Memo for the Factory-Installed Hardware Configuration

Each new Integrity NonStop NS1000 system includes a document that describes:

•

The cabinet included with the system

•

Each hardware enclosure installed in the cabinet

•

Cabinet U location of the bottom edge of each enclosure

•

Each ServerNet cable with:

Source and destination enclosure, component, and connector

Cable part number

Source and destination connection labels

This document is called a tech memo and serves as the physical location and

connection map for the system.

Configuration Forms for the ServerNet Adapter

ServerNet adapters can include the Fibre Channel ServerNet adapter (FCSA) and

Gigabit Ethernet 4-port ServerNet adapter (G4SA) that are installed in the Integrity

NonStop NS1000 system.

To add ServerNet adapter configuration forms to your Installation Document Packet,

copy the necessary forms from the adapter manuals. Follow any planning instructions

in the adapter manuals.

Topic Page

Tech Memo for the Factory-Installed Hardware Configuration

4-13

Configuration Forms for the ServerNet Adapter 4-13