NonStop NS1000 Planning Guide (H06.07+)

Modular System Hardware
HP Integrity NonStop NS1000 Planning Guide—542527-003
5-8
Power Distribution Units (PDUs)
If your system includes the optional rackmounted HP R5500 XR UPS, the modular
cabinet will have one PDU located on the rear left side and four extension bars on the
rear right side. The PDU and extension bars are oriented inward, facing the
components within the rack. To provide redundancy, components are plugged into the
left-side PDU and the extension bars. Each extension bar is plugged into the UPS.
This illustration shows the AC power feed cables for the PDU and UPS for AC power
feed from the top of the cabinet when the optional UPS and ERM are installed:
08
09
03
04
05
06
07
01
02
08
09
03
04
05
06
07
01
02
Uninterruptible
Power Supply
(UPS)
VST120.vsd
38
39
40
41
42
37
38
39
40
41
42
37
To AC Power Source
Power
Distribution
Unit (PDU)
Extended Runtime
Module (ERM)
Unused
Cable
Extension bars are
installed along the rear
right side instead of a
PDU when a UPS is
installed in the modular
cabinet