NonStop NS1000 Planning Guide (H06.07+)

Modular System Hardware

HP Integrity NonStop NS1000 Planning Guide—542527-003

5-11

Blade Element

HP Integrity rx2620 Server Description

The HP Integrity rx2620 server is 2U high and weighs 46 pounds (25 kilograms), is

rackmountable, has redundant AC power feeds, and provides front-to-rear cooling.

Each HP Integrity rx2620 server contains:

Component Description

One processor element (PE) A single 1.3 GHz 3 MB

Intel® Itanium® microprocessor

with its associated 4 GB or 8 GB memory. The memory is

accessed from the top of the enclosure when the

enclosure is pulled forward on its rails.

One ServerNet PCI Adapter

Card

Used for ServerNet fabric connections. One PCI card is

installed in slot 2.

One DVD drive Contains the HSS Boot CD. The CD must remain in the

blade element. The CD cannot be ejected until the blade

element is powered off.

Two power supplies Provides power to the blade element. The power supplies

are accessed from the back of the enclosure.

Four fans

(contained in three fan

assemblies)

Provides cooling for the system, memory, and P.CI card.

The fans are accessed from the top of the enclosure

when the enclosure is pulled forward on its rails

Field-Replaceable Units (FRUs) These components can be replaced by service providers

trained by HP:

FRU

Power supplies

Fans

Blade element

Memory upgrade

Online/Offline*

Online

Offline

*Online means that the component can be replaced while the blade element is operational. Offline means that the

blade element must be powered off before replacing the component.