NonStop NS1000 Planning Guide (H06.07+)

Modular System Hardware
HP Integrity NonStop NS1000 Planning Guide—542527-003
5-14
I/O Adapter Module (IOAM) Enclosure and I/O
Adapters
ServerNet PCI Adapter Card
Each HP Integrity rx2620 server contains one ServerNet PCI adapter card (installed in
PCI slot 2) to provide ServerNet connectivity.
This illustration shows the rear of an HP Integrity rx2620 server equipped with a
ServerNet PCI adapter card:
For information about installing the Integrity NonStop NS1000 server hardware, refer to
the NonStop NS1000 Hardware Installation Manual.
For additional information about the HP Integrity rx2620 server, refer to the HP
Cybrary: rx2620 home page:
http://cybrary.inet.cpqcorp.net/HW/SYS/INTEL/SERVER/SERVER_RX262
0/index.html
I/O Adapter Module (IOAM) Enclosure and I/O Adapters
The IOAM enclosure provides the Integrity NonStop NS1000 server with its system I/O.
For a general description of the IOAM enclosure and I/O adapters, refer to the
NonStop NS-Series Planning Guide. Details about the use or implementation of the
IOAM enclosure and I/O adapters that are specific to an Integrity NonStop NS1000
server are presented here:
•
Only one IOAM enclosure is supported in an Integrity NonStop NS1000 server.
•
The group number for the IOAM enclosure is 100 in an Integrity NonStop NS1000
system.
•
The maintenance entity on the ServerNet switch board supports direct connections
to blade elements and ServerNet I/O adapters.
•
Up to four 4PSEs provide ServerNet connectivity to the blade elements.
•
Only 4PSEs are supported for installation in slots 2.1, 2.2, 3.1, and 3.2 of the IOAM
enclosure for an Integrity NonStop NS1000 server.
VST011.vsd
PCI Adapter
Card
ServerNet Fabric Connections