NonStop NS1000 Planning Guide (H06.07+)

Modular System Hardware

HP Integrity NonStop NS1000 Planning Guide—542527-003

5-20

Blade Element Group-Module-Slot Numbering

•

Group:

In OSM Service Connection displays, 400 through 407 relates to blade

complexes 0 through 7. Each blade complex includes a blade element and its

associated processor.

Example: group 403 = blade complex 3

In the OSM Low-Level Link, 400 relates to all blade complexes.

Example: group 400 = any blade complex

•

Module:

In OSM Service Connection displays, a module represents either the blade

element or the processor:

In an Integrity NonStop NS1000 server, all blade elements are module 1.

Example: module 1 = any blade element

100-107 relates to processors 0-7

Example: module 102 = processor 2

In the OSM Low-Level Link, 100 through 107 relates to processors 0 through 7

Example: module 103 = processor 3

•

Slot:

In OSM Service Connection displays:

2 relates to the location of the ServerNet PCI adapter card in the PCI slots.

Only slot 2 is used.

3 through 4 relates to the location of the power supplies on the blade

element.

Example: slot 3 = the power supply in slot 3

16 through 19 relates to the location of the fans on the blade element.

Example: slot 18 = the fans in slot 18

In the OSM Low-Level Link, 1 relates to the location of the processor. Because

each blade element contains only one processor, it is always located in slot 1.

Example: slot 1 = any processor in any blade element.

•

Port: X and Y relate to the two ServerNet fabric ports in slot 2.

Example: Port X = Right port connecting to the ServerNet X fabric when facing the

blade element from the rear.