NonStop NS1000 Planning Guide (H06.07+)

Modular System Hardware

HP Integrity NonStop NS1000 Planning Guide—542527-003

5-21

Blade Element Group-Module-Slot Numbering

These tables show the default numbering for the blade elements of an Integrity

NonStop NS1000 system when blade elements are powered on and functioning:

Note. In OSM, if a blade element is not present or is powered off, processors might be

renumbered. For example, if processor 3 has been removed, processor 4 becomes processor

3 in OSM displays.

GMS Numbering Displayed in the OSM Service Connection:

Processor

Group*

Module

Slot

Port

(Slot 2 only)Blade Element Processor

0 400 1 100 2, PCI adapter

3-4, power supplies

16-17, system fan

18, memory fan

19, PCI fan

1 401 1 101

2 402 1 102

3 403 1 103

4 404 1 104

5 405 1 105

6 406 1 106

7 407 1 107

*In OSM, the term Blade Complex is used for the group.

GMS Numbering Displayed in the OSM Low-Level Link:

Processor ID Group* Module Slot

0 400 100 1

1 400 101 1

2 400 102 1

3 400 103 1

4 400 104 1

5 400 105 1

6 400 106 1

7 400 107 1

*In OSM, the term Blade Complex is used for the group.