NonStop NS1000 Planning Guide (H06.08+)

For a simplified illustration of the ServerNet cabling for this example system, see “Example
Cabling for a 2-Processor System” (page 104).
For details and instructions on connecting cables as part of the system installation, refer to the
NonStop NS1000 Hardware Installation Manual.
Example Cabling for a 2-Processor System
This illustration shows an example of a 2-processor system. This simplified, conceptual
representation shows the X and Y ServerNet cabling between the blade elements, VIO enclosures,
and Fibre Channel disk modules. The example of Fibre Channel disk module configuration for
the group 100 VIO enclosures is described in more detail in “Four Fibre Channel Ports, Two
FCDMs, Two VIO Enclosures” (page 86). To simplify the drawing, power and Ethernet cables
are not shown. For cable-by-cable interconnect diagrams, see “Internal ServerNet Interconnect
Cabling” (page 76).
104 Examples of Configurations