NonStop NS1000 Planning Guide (H06.08+)

the dedicated service LAN, use the slower 10/100 Mbps PIF A rather than one of the high-speed
1000 Mbps Ethernet ports of PIF C or D.
Dedicated Service LAN Links With Two VIO Enclosures
This illustration shows the dedicated service LAN cables connected to the Ethernet ports in slot
6B of both VIO enclosures (module 2 and module 3) and to the maintenance switch:
The values in this table show the identification for the Ethernet ports in the preceding illustration:
IP ConfigurationTCP/IP StackEthernet LIFEthernet PIFGMS for Ethernet Port
Location in VIO
Enclosure
IP: 192.231.36.10 GW:
192.231.36.9 Subnet:
%hFFFFFF00
Hostname: osmlanx
$ZTCP0L1002RG10026.0.A100.2.6b Port A
IP: 192.231.36.11 GW:
192.231.36.9 Subnet:
%hFFFFFF00
Hostname: osmlany
$ZTCP1L1003RG10036.0.A100.3.6b Port A
Initial Configuration for a Dedicated Service LAN
New systems are shipped with an initial set of IP addresses configured. For a listing of these
initial IP addresses, see “IP Addresses” (page 115).
Factory-default IP addresses for the Ethernet ports are available from your service provider (in
the Versatile I/O Manual.) IP addresses for SWAN concentrators are in the WAN Subsystem
Configuration and Management Manual.
118 Control, Configuration, and Maintenance Tools