NonStop NS1000 Planning Guide (H06.08+)

The command interpreter input file (CIIN) is automatically invoked after the first processor is
loaded. The CIIN file shipped with new systems contains the TACL RELOAD * command, which
loads the remaining processors.
For default configurations of the Fibre Channel ports, Fibre Channel disk modules, and load
disks, see “Example Configurations of the VIO Enclosures and FCDMs” (page 85). For system
load procedures, see the NonStop NS1000 Hardware Installation Manual.
System Installation Document Packet
To keep track of the hardware configuration, internal and external communications cabling, IP
addresses, and connect networks, assemble and retain as the systems records an Installation
Document Packet. This packet can include:
• “Tech Memo for the Factory-Installed Hardware Configuration” (page 46)
• “Configuration Forms for the ServerNet Adapters” (page 47)
Tech Memo for the Factory-Installed Hardware Configuration
Each new Integrity NonStop NS1000 system includes a document that describes:
• The cabinet included with the system
• Each hardware enclosure installed in the cabinet
46 Integrity NonStop NS1000 System Description