NonStop NS1000 Planning Guide (H06.08+)

MeaningStateLED IndicatorFront Panel Illustration
Reference Number
This is the power on/off
switch for the server.
On/OffPower button5
The green on/off LED is
illuminated when the power
is on.
On/OffPower LED6
ServerNet PCI Adapter Card
Each HP Integrity rx2620 server contains one ServerNet PCI adapter card (installed in PCI slot
2) to provide ServerNet connectivity.
This illustration shows the rear of an HP Integrity rx2620 server equipped with a ServerNet PCI
adapter card:
For information about installing the Integrity NonStop NS1000 server hardware, refer to the
NonStop NS1000 Hardware Installation Manual.
For additional information about the HP Integrity rx2620 server, refer to the HP Cybrary: rx2620
home page:
http://cybrary.inet.cpqcorp.net/HW/SYS/INTEL/SERVER/SERVER_RX2620/index.html
Versatile I/O (VIO) Enclosure
A VIO enclosure, which is 4U, provides connectivity to the processors, Fibre Channel storage
devices, and gigabit Ethernet networking. Two VIO enclosures, one required for each ServerNet
fabric, are installed in a 19-inch rack.
NOTE: For NonStop NS1000 servers that contain I/O Adapter Module (IOAM) enclosures,
refer to the H06.07 (or earlier) version of this manual for planning, configuration, and maintenance
information of the IOAM enclosure.
Each VIO enclosure contains:
• Connectivity for up to eight processors, configured in pairs
• Four embedded Fibre Channel ports and four optional ESS (Fibre Channel) ports for
communicating with storage devices such as a “Fibre Channel Disk Module” (page 62),
tape devices, or an Enterprise Storage System (ESS) disk
• Up to eight copper/optical Ethernet ports used for Ethernet connectivity
• Two fans to provide the cooling for components inside a VIO enclosure
• Two power supplies with universal AC input to provide power to the components in a VIO
enclosure
60 Modular System Hardware