NonStop NS1000 Planning Guide (H06.08+)

Default Naming Conventions
The Integrity NonStop NS1000 system implements default naming conventions in the same
manner as other Integrity NonStop NS-series systems.
With a few exceptions, default naming conventions are not necessary for the modular resources
that make up an Integrity NonStop NS1000 system. In most cases, users can name their resources
at will and use the appropriate management applications and tools to find the location of the
resource.
However, default naming conventions for certain resources simplify creation of the initial
configuration files and automatic generation of the names of the modular resources. When
autoconfigure mode is set to ON for storage devices, the preconfigured default naming convention
is used to generate the names of the Fibre Channel disk drives.
Preconfigured default resource names are:
DescriptionExampleNaming ConventionType of Object
Tenth Fibre Channel disk
drive in the system
$FC10
$FC number
Fiber Channel disk drive
Twentieth ESS disk drive in
the system
$ESS20
$ESS number
ESS disk drive
First modular tape drive in
the system
$TAPE01
$TAPE number
Modular tape drive
Ethernet connection in
location 100.2.7
G10027G group module slotEthernet
LIF for PIF at location
100.2.7.0.B
L10027BL group module slot portEthernet LIF
First TCP6SAM or TCP/IP
process for the system
$ZTC0$ZTC numberTCP/IP process
First Telserv process for the
system
$ZTN0$ZTN numberTelserv process
90 System Configuration Guidelines