NonStop NS14000 Planning Guide (H06.08+)

The command interpreter input file (CIIN) is automatically invoked after the first processor is
loaded. The CIIN file shipped with new systems contains the TACL RELOAD * command, which
loads the remaining processors.
For default configurations of the Fibre Channel ports, Fibre Channel disk modules, and load
disks, see Example Configurations of the VIO Enclosures and Fibre Channel Disk Modules on
page 6-18. For system load procedures, see the NonStop NS14000 Hardware Installation Manual.
System Installation Document Packet
To keep track of the hardware configuration, internal and external communications cabling, IP
addresses, and connect networks, assemble and retain as the systems records an Installation
Document Packet. This packet can include:
PageTopic
“Configuration Forms for the ServerNet Adapters”“Configuration Forms for the ServerNet Adapters”
“Configuration Form for a ServerNet Cluster”“Configuration Form for a ServerNet Cluster”
System Installation Document Packet 47