NonStop NS14000 Planning Guide (H06.08+)

This table lists the Fibre Channel port group-module-slot-port (GMSP) and disk
group-module-shelf-bay (GMSB) identification for the factory-default system disk locations in
the configuration of four Fibre Channel ports, two Fibre Channel disk modules, and two VIO
enclosures:
Disk GMSB*Fibre Channel Port GMSPDisk Volume Name
100.211.101100.2.1.1 and 100.3.1.1$SYSTEM (primary)
100.211.102100.2.1.1 and 100.3.1.1$DSMSCM (primary)
100.211.103100.2.1.1 and 100.3.1.1$AUDIT (primary)
100.211.104100.2.1.1 and 100.3.1.1$OSS (primary)
100.212.101100.2.1.2 and 100.3.1.2$SYSTEM (mirror)
100.212.102100.2.1.2 and 100.3.1.2$DSMSCM (mirror)
100.212.103100.2.1.2 and 100.3.1.2$AUDIT (mirror)
100.212.104100.2.1.2 and 100.3.1.2$OSS (mirror)
* For an illustration of the factory-default slot locations for a Fibre Channel disk module, see “Factory-Default Disk
Volume Locations”.
Eight Fibre Channel Ports, Four FCDMs, Two VIO Enclosures
This illustration shows example cable connections between eight Fibre Channel ports (four on
each VIO enclosure) and the two sets of primary and mirror Fibre Channel disk modules:
Fibre Channel Devices 89