NonStop NS14000 Planning Guide (H06.10+)

Example Internal Cabling
This illustration shows an example 4-processor duplex system in a single cabinet. This simplified,
conceptual representation shows the X and Y ServerNet cabling between the NonStop Blade
Element, LSU, VIO enclosures, and Fibre Channel disk modules. The example of Fibre Channel
disk module configuration for the group 100 VIO enclosures is described in more detail in Four
Fibre Channel Ports, Two FCDMs, Two VIO Enclosures on page 6-19. To simplify the drawings,
power and Ethernet cables are not shown. For cable-by-cable interconnect diagrams, see “Internal
ServerNet Interconnect Cabling” (page 77).
Cable management hardware that is part of each modular enclosure and also the modular cabinet
are not shown. Therefore, actual cable routing using the cable management hardware is different
from that shown. For details and instructions on connecting cables as part of the system installation
or on cable routing, refer to the NonStop NS14000 Hardware Installation Manual.
102 Examples of Configurations