NonStop NS14000 Planning Guide (H06.10+)

For a fault-tolerant dedicated service LAN, two Ethernet ports are required; one port located in
VIO enclosure module 2 for X ServerNet fabric connectivity, and one port located in VIO enclosure
module 3 for Y ServerNet fabric connectivity. When the Ethernet port provides connection to
the dedicated service LAN, use the slower 10/100 Mbps PIF A rather than one of the high-speed
1000 Mbps Ethernet ports of PIF C or D.
Dedicated Service LAN Links With Two VIO Enclosures
This illustration shows the dedicated service LAN cables connected to the Ethernet ports in slot
6B of both VIO enclosures (module 2 and module 3) and to the maintenance switch:
Dedicated Service LAN 119