NonStop NS14000 Planning Guide (H06.10+)

The command interpreter input file (CIIN) is automatically invoked after the first processor is
loaded. The CIIN file shipped with new systems contains the TACL RELOAD * command, which
loads the remaining processors.
For default configurations of the Fibre Channel ports, Fibre Channel disk modules, and load
disks, see “Example Configurations of the VIO Enclosures and Fibre Channel Disk Modules”
(page 88). For system load procedures, see the NonStop NS14000 Hardware Installation Manual.
System Installation Document Packet
To keep track of the hardware configuration, internal and external communications cabling, IP
addresses, and connect networks, assemble and retain as the systems records an Installation
Document Packet. This packet can include:
• “Configuration Forms for the ServerNet Adapters” (page 48)
• “Configuration Form for a ServerNet Cluster” (page 64)
Configuration Tech Memo for the Factory-Installed Hardware
Each new Integrity NonStop NS14000 system includes a document called a tech memo. It serves
as the physical location and connection map for the system and describes:
• Each cabinet included with the system
• Each hardware enclosure installed in the cabinet
System Installation Document Packet 47