NonStop NS14000 Planning Guide (H06.10+)

Each PDU distributes the site AC power as single phase 200 to 240 V ac to the 39 outlets for
connecting the power cords from the components mounted in the modular cabinet. These outlets
provide the 180-264 V ac required by the modular hardware.
The AC power feed cables for the PDUs are mounted to exit the modular cabinet at either the
top or bottom rear corners of the cabinet depending on what is ordered for the site power feed.
This illustration shows the AC power feed cables on PDUs for AC feed at the bottom of the
cabinet and the AC power outlets along the PDU. These power outlets face in toward the cabinet:
This illustration shows the AC power feed cables on PDUs for AC feed at the top of the cabinet:
Modular Hardware Components 53