NonStop NS14000 Planning Guide (H06.10+)

Each PDU is wired to distribute the load segments to its receptacles.
CAUTION: If you are installing Integrity NonStop NS14000 system enclosures in a modular
cabinet, balance the current load among the available load segments. Using only one of the
available load segments, especially for larger systems, can cause unbalanced loading and might
violate applicable electrical codes. Connecting the two power plugs from an enclosure to the
same load segment causes failure of the hardware if that load segment fails.
NonStop Blade Element
The NonStop Blade Element enclosure, which is 5U and weighs 112 pounds (46 kilograms), has
these physical attributes:
• Rackmountable
• Redundant AC power feeds
• Front-to-rear cooling
• Cable connections at rear (power, reintegration, LSU) with cable management equipment
on the rear of the cabinet
Each NonStop Blade Element includes these field replaceable units (FRUs):
• Processor board with up to four Itanium microprocessors, interface ASIC, clock generation
(accessed through front of enclosure)
• Memory board that can hold up to 32 DIMMs, each one 4 GB, for a total memory capacity
of 128 GB (accessed through front of enclosure)
Modular Hardware Components 55