NonStop NS14000 Planning Guide (H06.10+)

Processor NumberFabricSlot.PortVIO Enclosure Module
4X2.12
5X2.2
6X2.3
7X2.4
0Y14.13
1Y14.2
2Y14.3
3Y14.4
4Y2.13
5Y2.2
6Y2.3
7Y2.4
The two cabling diagrams on the next pages illustrate the default configuration and connections
for a triplex system processor. These diagrams are not for use in installing or cabling the system.
For instructions on connecting the cables, see the NonStop NS14000 Hardware Installation Manual.
This figure shows example connections to the default configuration of the NonStop Blade Element
reintegration links (NonStop Blade Element connectors S, T, Q, R) and ServerNet-to-processor
ports 14.1 to 14.4 on the VIO enclosure, which defines triplex processor numbers 0 to 3. Two VIO
enclosures are required, one for the X-fabric and the other for the Y-fabric:
Internal ServerNet Interconnect Cabling 81