NonStop NS14000 Series Planning Guide (H06.13+)

Worksheet” (page 62), Table 1: Example Load Calculations for Cabinet One (page 66), and
Table 2 (page 67).
• Changed VIO “IP Addresses” (page 87) from 192.231.36.222 to 192.231.36.202 and
192.231.36.223 to 192.231.36.203.
New and Changed Information for 543635-004
• The title of this guide has been changed to the NonStop NS14000 Series Planning Guide
because it supports both the NonStop NS14000 server and the NonStop NS14200 server.
• This guide has been streamlined and reorganized to focus on planning information.
• The NonStop NS14200 server and the NSE-S processor type has been added to Chapter 1
(page 15).
• “Processor Element” (page 105) has been updated to include the NSE-S processor type.
• “Plan View From Above the Modular Cabinet” (page 61) has been changed to show the
dimensions of the HP10000 G2 Series rack.
• “Modular Cabinet Physical Specifications” (page 61) has been changed to show the dimensions
of the HP10000 G2 Series rack.
• “Modular Cabinet Stability” (page 63) has been added to discuss the use of cabinet stabilizers.
• The disk path identifiers in several illustrations have been corrected. See “Example
Configurations of the VIO Enclosures and Fibre Channel Disk Modules” (page 76).
• Information about ISEE has been added. See Chapter 6 (page 85).
• Two cables have been added to the list of available cables in Internal Cables.
• Editorial changes have been made throughout the manual.
Document Organization
NOTE: For NonStop NS14000 series servers that contain I/O Adapter Module (IOAM) enclosures,
refer to the H06.07 (or earlier) version of the NonStop NS14000 Planning Guide for planning,
configuration, and maintenance information of the IOAM enclosure.
This guide is divided into these chapters:
ContentsChapter
Provides an overview of the modular hardware components
in a NonStop NS14000 series system.
Chapter 1: “NonStop NS14000 Series System Overview”
(page 15)
Describes power, environmental, and space considerations
for your site.
Chapter 2: “Site Preparation Guidelines” (page 36)
Provides installation specifications for fully populated
NonStop NS14000 series enclosures.
Chapter 3: “System Installation Specifications” (page 41)
Provides guidelines for implementing the modular hardware.Chapter 4: “System Configuration Guidelines” (page 68)
Provides example configurations of the NonStop NS14000
series modular hardware.
Chapter 5: “Hardware Configurations in Modular Cabinets”
(page 84)
Describes the maintenance architecture used for NonStop
NS14000 series system.
Chapter 6: “Maintenance and Support Connectivity”
(page 85)
Identifies the cables used with NonStop NS14000 series
hardware
Section : “Cable Types, Connectors, Length Restrictions,
and Product IDs” (page 94)
Describes how the OSM applications are used to manage
a NonStop NS14000 series system.
Appendix B: “Operations and Management Using OSM
Applications” (page 97)
Document Organization 11