NonStop NS14000 Series Planning Guide (H06.13+)

NonStop Blade Element Group-Module-Slot Numbering
• Processor group: 400 through 401 relates to NonStop Blade Complex 0 through 1. Example:
group 401 = NonStop Blade Complex 1
• Module: 1 through 3 relates to the processor NonStop Blade Element ID A through C. Example:
module 2 = NonStop Blade Element B
• Slot: 71 through 78 relates to location of the Blade optics adapter. Example: Slot 72 = Blade
optics adapter in slot 72
• Port: J0 through J7 or K0 through K7 relates to the two optics ports in a specific slot.
A number of GMS configurations are possible in the modular NonStop NS14000 series system.
This table shows the default numbering for the logical processors:
PortSlot (Optics)Module (NonStop Blade Element)Group
(NonStop
Blade
Complex)
Logical
Processors
J0-J7, K0-K7Blade optics
adapters 1-8
3 (C)2 (B)1 (A)4000-3*
4014-7
(software
identified as
slots 71-78)
* Logical processor 0 must be in NonStop Blade Complex 0 (group 400). All other processors can be in any user-defined
group.
This illustration shows GMS numbering for a NonStop Blade Element enclosure:
30 NonStop NS14000 Series System Overview