NonStop NS14000 Series Planning Guide (H06.13+)

LSU Group-Module-Slot Numbering
This table shows the default numbering for the LSUs:
I/O Position (Slot)ModuleGroup (NonStop Blade
Complex)
1
Item
1 - Optics adapter (rear
side, slots 20-27) 2 - Logic
board (front side, slots
50-57)
100 - 107400 - 401Individual LSU J set
Not used at this timeIndividual LSU K set
1
See “NonStop Blade Element Group-Module-Slot Numbering” (page 30).
Group and module numbers correspond to the logical processor number (0, 1, 2, 3) and NonStop
Blade Element (A, B, C) as determined by the ServerNet connection to the VIO enclosure.
This illustration shows an example LSU configuration equipped with four optic adapters (rear side)
in slots 20 through 23 and four LSU logic boards (front side) in positions 50 through 53:
Component Location and Identification 31