NonStop NS14000 Series Planning Guide (H06.13+)

TotalWeightNumber of
Enclosures
Enclosure Type
kglbskglbs
30.8468VIO enclosure
35.478Fibre Channel disk module
2.224.89Maintenance switch (Ethernet)
15.434Rackmount console system unit with
keyboard and display
57126R5000 UPS
63139R5000 ERM
72.6160R5500 XR UPS (single-phase power)
77.1170R5500 ERM
----Total
* Modular cabinet weight includes the PDUs and their associated wiring and receptacles.
For examples of calculating the weight for various enclosure combinations, refer to “Calculating
Specifications for Enclosure Combinations” (page 65).
Modular Cabinet Stability
Cabinet stabilizers are required when you have less than four cabinets bayed together.
NOTE: Cabinet stability is of special concern when equipment is routinely installed, removed,
or accessed within the cabinet. Stability is addressed through the use of leveling feet, baying kits,
fixed stabilizers, and/or ballast.
For information about best practices for cabinets, see:
• HP 10000 G2 Series Rack User Guide
• Best practices for HP 10000 Series and HP 10000 G2 Series Racks
Environmental Specifications
This subsection provides information about environmental specifications and covers these topics:
• “Heat Dissipation Specifications and Worksheet” (page 64)
• “Operating Temperature, Humidity, and Altitude” (page 64)
• “Nonoperating Temperature, Humidity, and Altitude (except R5000 UPS and R5000 ERM)”
(page 65)
• “Nonoperating Temperature, Humidity, and Altitude for R5000 UPS and R5000 ERM”
(page 65)
• “Cooling Airflow Direction” (page 65)
• “Typical Acoustic Noise Emissions” (page 65)
• “Tested Electrostatic Immunity” (page 65)
Dimensions and Weights 63