NonStop NS14000 Series Planning Guide (H06.13+)

DescriptionExampleNaming ConventionType of Object
Ethernet connectivity in
location 100.2.7
G10027G group module slotEthernet connection
LIF for PIF at location
100.2.7.0.B
L10027BL group module slot portEthernet LIF
First TCP6SAM or TCP/IP
process for the system
$ZTC0$ZTC numberTCP/IP process
First Telserv process for the
system
$ZTN0$ZTN numberTelserv process
First Listener process for the
system
LSN0$LSN numberListener process
NoneNoneAutomatically created by
WANMGR
TFTP process
NoneNoneAutomatically created by
WANMGR
WANBOOT process
Tenth SWAN concentrator
in the system
S10S numberSWAN Concentrator
On new NonStop systems, only one of each of these processes and names is configured:
• TCP6SAM - $ZTC0
• Telserv - $ZTCN0
• Listener - $LNS0
No TFTP or WANBOOT process is configured for new NonStop systems.
NOTE: Naming conventions or configurations for the dedicated service LAN TCP/IP are the same
as the TCP/IP conventions used with G-series RVUs and are named $ZTCP0 and $ZTCP1.
CAUTION: Do not change the process names for $ZTCP0 and $ZTCP1. Doing so will make some
components inaccessible.
OSM Service Connection provides the location of the resource by adding an identifying suffix to
the names of all the system resources. Other interfaces, such as SCF, also provide means to locate
named resources.
Default Naming Conventions 83