NonStop NS16000 Planning Guide (H06.08+)

System Configuration Guidelines
HP Integrity NonStop NS16000 Planning Guide—529567-009
6-29
Example Configurations of the IOAM Enclosure and
Fibre Channel Disk Module
Four FCSAs, Four FCDMs, Two IOAM Enclosures
This illustration shows example cable connections between the four FCSAs split
between two IOAM enclosures and two sets of primary and mirror Fibre Channel disk
modules:
This table lists the FCSA group-module-slot-port (GMSP) and disk
group-module-shelf-bay (GMSB) identification for the factory-default system disk
locations in the configuration of four FCSAs, four Fibre Channel disk modules, and two
IOAM enclosures:
Disk Volume Name FCSA GMSP Disk GMSB
*
$SYSTEM (primary) 110.2.1.1 and 111.2.1.1 110.211.101
$DSMSCM (primary) 110.2.1.1 and 111.2.1.1 110.211.102
$AUDIT (primary) 110.2.1.1 and 111.2.1.1 110.211.103
$OSS (primary) 110.2.1.1 and 111.2.1.1 110.211.104
$SYSTEM (mirror) 110.2.1.2 and 111.2.1.2 110.212.101
$DSMSCM (mirror) 110.2.1.2 and 111.2.1.2 110.212.102
$AUDIT (mirror) 110.2.1.2 and 111.2.1.2 110.212.103
$OSS (mirror) 110.2.1.2 and 111.2.1.2 110.212.104
*
For an illustration of the factory-default slot locations for a Fibre Channel disk module, see
Factory-Default Disk Volume Locations
on page 6-22
VST087.vsd
FCSA
Mirror
FCDM 1
Primary
FCDM 2
Mirror
FCDM 2
FCSA
FCSA
IOAM
Enclosure
FCSA
Primary
FCDM 1