NonStop NS16000 Planning Guide (H06.08+)

System Hardware Overview

HP Integrity NonStop NS16000 Planning Guide—529567-009

1-4

NonStop S-Series I/O Enclosure

NonStop S-series I/O enclosures equipped with model 1980 I/O multifunction 2

customer replaceable units (IOMF 2 CRUs) can be connected to the NonStop

NS16000 server via fiber-optic ServerNet cables and the processor switch (p-switch).

All hardware and I/O connectivity that is currently supported for NonStop S-series I/O

enclosures is also supported with the Integrity NonStop NS16000 servers, with the

exception of FOX ring connectivity. The model 1952 IOMF CRU, ServerNet/FX, and

ServerNet/FX 2 adapters are not supported.

For site preparation specifications for the NonStop S-series I/O enclosures, see

Section 3, System Installation Specifications.

Preparation for Other Server Hardware

This guide provides the specifications only for the Integrity NonStop NS16000 server

modular cabinet and enclosures identified earlier in this section. For site preparation

specifications for other HP hardware that will be installed at the site with the Integrity

NonStop NS16000 servers, consult with your HP account team. For site preparation

specifications relating to hardware from other manufacturers, refer to the

documentation for those devices.