NonStop NS16000 Planning Guide (H06.08+)

Control, Configuration, and Maintenance Tools
HP Integrity NonStop NS16000 Planning Guide—529567-009
B-11
Fault-Tolerant Configuration
•
One of the two IOAM enclosure ServerNet switch boards to each maintenance
switch
•
G4SA, E4SA, FESA, or GESA on the X fabric to the first maintenance switch
•
G4SA, E4SA, FESA, or GESA on the X fabric to the second maintenance switch
Caution. To avoid possible conflicts on the LAN:
•
If the configuration includes two maintenance switches, install and configure one switch
completely, including assigning its IP address, before you install the other.
•
Only one connection between the maintenance switches is permitted. More than one
connection overloads network traffic, rendering the dedicated service LAN unusable.
•
If ServerNet switch boards in the IOAM enclosure or p-switches will have static IP
addresses, configure one completely, including assigning the IP address, before you
configure the other.