NonStop NS16000 Planning Guide (H06.08+)

Control, Configuration, and Maintenance Tools
HP Integrity NonStop NS16000 Planning Guide—529567-009
B-13
IP Addresses
IP Addresses
Integrity NonStop NS16000 servers require Internet protocol (IP) addresses for these
components that are connected to the dedicated service LAN:
•
ServerNet switch boards in the p-switch
•
ServerNet switch boards in the IOAM enclosure
•
FESAs, G4SAs, E4SAs, and GESAs
•
Maintenance switch
•
System consoles
•
OSM Low-Level Link
•
OSM Service Connection
•
UPS (optional)
•
Fibre Channel to SCSI converter (optional)
These components have default IP addresses that are preconfigured at the factory.
You must change these preconfigured IP addresses to addresses appropriate for the
LAN environment:
Component Location Group.Module.Slot
Default IP
Address
Used By
(page 1 of 2)
ServerNet switch
boards in the p-switch
N/A 100.2.14 192.231.36.202 OSM Low-
Level Link
100.3.14 192.231.36.203
ServerNet switch
boards in the IOAM
enclosure
N/A 110.2.14 192.231.36.222 OSM Low-
Level Link
110.3.14 192.231.36.223
111.2.14 192.231.36.224
111.3.14 192.231.36.225
112.2.14 192.231.36.226
112.3.14 192.231.36.227
113.2.14 192.231.36.228
113.3.14 192.231.36.229
114.2.14 192.231.36.230
114.3.14 192.231.36.231
115.2.14 192.231.36.232
115.3.14 192.231.36.233
Maintenance switch
(ProCurve 2524)
(rackmounted)
Rack 01 N/A 192.231.36.21 OSM Service
Connection
Rack 02 N/A 192.231.36.22
Additional switches
(rackmounted only)
N/A N/A 192.231.36.23,
192.231.36.24,
...
192.231.36.n