NonStop NS16000 Planning Guide (H06.08+)

Modular System Hardware

HP Integrity NonStop NS16000 Planning Guide—529567-009

5-3

Modular Cabinets

The modular cabinet is a EIA standard 19-inch, 42U high, rack for mounting modular

components. The modular cabinet comes equipped with front and rear doors and

includes a rear extension that makes it deeper than some industry-standard racks. The

Power Distribution Units (PDUs) are mounted along the rear extension without

occupying any U-space in the cabinet and are oriented inward, facing the components

within the modular cabinet. Depending on your power requirements, these cabinet and

power configurations are supported for installing the components of an Integrity

NonStop NS16000 server:

North America and Japan 208 V AC input, 3-phase delta, 24A

RMS Power

•

EIA standard 19-inch rack with 42U of rack space

•

Geography: North America and Japan

•

Recommended for most configurations

•

Includes 2 power distribution units (PDU): Zero-U rack design

•

PDU input characteristics

208 V ac, 3-phase delta, 24A RMS, 4-wire

50/60Hz

NEMA L15-30 input plug

6.5 feet (2 m) attached power cord

•

PDU output characteristics

3 circuit-breaker-protected 13.86A load segments

36 AC receptacles per PDU (12 per segment) - IEC 320 C13 10A receptacle

type

3 AC receptacles per PDU (1 per segment) - IEC 320 C19 12A receptacle type

•

Includes front and rear doors

42U Modular Cabinets With ... Page

North America and Japan 208 V AC input, 3-phase delta, 24A RMS Power

5-3

North America and Japan 200 to 240 V AC input, Single phase, 40A RMS Power 5-4

International 380 to 415 V AC input, 3-phase Wye, 16A RMS Power 5-4

International 200 to 240 V AC input, Single phase, 32A RMS Power 5-5

Note. If your system includes the optional rackmounted HP R5500 XR UPS, the modular

cabinet will have one PDU located on the rear left side and four extension bars on the rear right

side. To provide redundancy, components are plugged into the left-side PDU and the extension

bars. Each extension bar is plugged into the UPS.