NonStop NS16000 Planning Guide (H06.08+)

Modular System Hardware
HP Integrity NonStop NS16000 Planning Guide—529567-009
5-31
NonStop Blade Element Group-Module-Slot
Numbering
NonStop Blade Element Group-Module-Slot Numbering
•
Processor group: 400 through 403 relates to NonStop Blade Complex 0 through 3.
Example: group 403 = NonStop Blade Complex 3
•
Module: 1 through 3 relates to the processor NonStop Blade Element ID A through
C.
Example: module 2 = NonStop Blade Element B
•
Slot: 71 through 78 relates to location of the Blade optics adapter.
Example: Slot 72 = Blade optics adapter in slot 72
•
Port: J0 through J7 or K0 through K7 relates to the two optics ports in a specific
slot.
A number of GMS configurations are possible in the modular Integrity NonStop
NS16000 system. This table shows the default numbering for the logical processors:
This illustration shows GMS numbering for a NonStop Blade Element enclosure:
Logical
Processors
Group (NonStop
Blade Complex)
Module (NonStop
Blade Element) Slot (Optics) Port
0-3* 400 1 (A) 2 (B) 3 (C) Blade optics
adapters 1-8
(software identified
as slots 71-78)
J0-J7,
K0-K7
4-7 401
8-12 402
13-15 403
* Logical processor 0 must be in NonStop Blade Complex 0 (group 400). All other
processors can be in any user-defined group.
VST757.vsd
NSBE
Enclosure
(rear view)
Blade Optics
Adapters
(Slots 71-78)
NSBE Reintegration
(Slot 80)
Ports (J0-J8, K0-K8)
J1
J0
J3
J2
J5
J4
J7
J6
K1
K0
K3
K2
K5
K4
K7
K6
Q R S T
71 72 73 74 75 76 77 78
Group
Module
Group
(400-403)
Module (1-3)