NonStop NS16000 Series Planning Guide (H06.11+)

• In “Operations and Management Using OSM Applications” (page 155) changed table and
note below table.
• Changed “AC Power Monitoring” (page 156), including “OSM Power Fail Support” (page 156)
and “Considerations for Ride-Through Time Configuration” (page 157).
New and Changed Information for 529567–021
• Added DL385 G2 and G5 CLIM and DL380 G6 CLIM designations throughout the document.
• Added Telco CLIM to “NonStop NS16000 Series System Overview” (page 19), “Processor
Switch Group-Module-Slot Numbering” (page 26), “CLIM Connection Group-Module-Slot-Port
Numbering” (page 27), “Configuration Forms for CLIMs and ServerNet Adapters” (page 31),
“Cable Length Restrictions”, “Processor Switch ServerNet Connections” (page 75), “Processor
Switches to Networking CLIMs” (page 76), “Ethernet to Networks” (page 103), “Default Naming
Conventions” (page 105), and “Cable Length Restrictions”.
• Added Telco CLIM, DL380 G6 CLIM, D2700 SAS disk enclosure, and CLIM cable management
Ethernet patch panel to “NonStop NS16000 Series Hardware ” (page 20).
• Revised “Enclosure Power Loads” (page 55).
• Changed footnotes to “Enclosure Power Loads” (page 55), “Unit Sizes” (page 57), “Enclosure
Dimensions” (page 58), and “Modular Cabinet and Enclosure Weights With Worksheet”
(page 59).
• Added CLIM cable management Ethernet patch panel to “Unit Sizes” (page 57).
• Added DL380 G6 CLIM, D2700 SAS disk enclosure, and CLIM cable management Ethernet
patch panel to “Enclosure Dimensions” (page 58).
• Added DL380 G6 CLIM, D2700 SAS disk enclosure, SAS disk drives, disk blank, and CLIM
cable management Ethernet patch panel to “Modular Cabinet and Enclosure Weights With
Worksheet” (page 59).
• Revised “Heat Dissipation Specifications and Worksheet” (page 60).
• Added SAS disk enclosure to “Operating Temperature, Humidity, and Altitude” (page 61).
• Revised cabinet load calculations in Table 2 (page 63), Table 3 (page 64), and Table 4
(page 64).
• Added Telco CLIM and CLIM cable management Ethernet patch panel to “Enclosure Locations
in Cabinets” (page 135).
• “Cable Length Restrictions”
• Added DL380 Storage CLIM and D2700 SAS disk enclosure to “Storage CLIM Devices”
(page 80).
• Added DL380 G6 Storage CLIM to “SAS Ports to SAS Disk Enclosures” (page 82) and
“Configuration Restrictions for Storage CLIMs” (page 82).
• Revised “Configurations for Storage CLIMs and SAS Disk Enclosures” (page 83):
Changed “DL385 G2 or G5 Storage CLIM and SAS Disk Enclosure Configurations”
(page 83), including “Two DL385 G2 or G5 Storage CLIMs, Two MSA70 SAS Disk
◦
Enclosures” (page 83), “Four DL385 G2 or G5 Storage CLIMs, Four MSA70 SAS Disk
Enclosures” (page 84), and “Daisy-Chain Configurations (DL385 G2 or G5 Storage
CLIMs Only with MSA70 SAS Disk Enclosures)” (page 84).
◦ Added “DL380 G6 Storage CLIM and SAS Disk Enclosure Configurations” (page 85),
including “Two DL380 G6 Storage CLIMs, Two D2700 SAS Disk Enclosures” (page 85),
“Two DL380 G6 Storage CLIMs, Four D2700 SAS Disk Enclosures” (page 87), “Four
DL380 G6 Storage CLIMs, Four D2700 SAS Disk Enclosures” (page 87), and “Four
DL380 G6 Storage CLIMs, Eight D2700 SAS Disk Enclosures” (page 88).
10