NonStop NS16000 Series Planning Guide (H06.11+)

Default Naming Conventions
With a few exceptions, default naming conventions are not necessary for the modular resources
that make up Integrity NonStop NS16000 series systems. In most cases, users can name their
resources at will and use the appropriate management applications and tools to find the location
of the resource.
However, default naming conventions for certain resources simplify creation of the initial
configuration files and automatic generation of the names of the modular resources. When
autoconfigure mode is set to ON for storage subsystems, the preconfigured default naming
convention is used to generate the names of the Fibre Channel disk drives. Preconfigured default
resource names are:
DescriptionExampleNaming Convention
1
Type of Object
Tenth Fibre Channel disk
drive in the system
$FC10$FC numberFiber Channel disk drive
Twentieth ESS disk drive in
the system
$ESS20$ESS numberESS disk drive
First modular tape drive in
the system
$TAPE01$TAPE numberModular tape drive
IP CLIM located in group
100, module 2 and
N100291N group module slot
port
IP CLIM
connected to Pswitch slot 9,
port 1
Telco CLIM located in group
100, module 2 and
O100291O group module slot
port
Telco CLIM
connected to Pswitch slot 9,
port 1
IB CLIM located in group
100, module 2 and
B100291B group module slot
port
IB CLIM
connected to Pswitch slot 9,
port 1
Storage CLIM located in
group 100, module 2 and
S100241S group module slot
port
Storage CLIM
connected to Pswitch slot 4,
port 1.
Twentieth SAS disk volume
in the system
$SAS20$SAS numberSAS disk volume
G4SA in location 111.2.3G11123G group module slotG4SA
LIF for PIF at location
111.2.3.0.B
L11123BL group module slot
port
G4SA LIF
First TCP6SAM or TCP/IP
process for the system
$ZTC0$ZTC numberTCP/IP process
First Telserv process for the
system
$ZTN0$ZTN numberTelserv process
First Listener process for the
system
LSN0$LSN numberListener process
NoneNoneAutomatically created by
WANMGR
TFTP process
NoneNoneAutomatically created by
WANMGR
WANBOOT process
Tenth SWAN concentrator
in the system
S10S numberSWAN Concentrator
Default Naming Conventions 105