NonStop NS16000 Series Planning Guide (H06.11+)

1
For more information about CLIM processes that use the CIP subsystem and the naming conventions for these processes,
refer to the Cluster I/O Protocols (CIP) Configuration and Management Manual.
On new NonStop systems, only one of each of these processes and names is configured:
• TCP6SAM - $ZTC0
• Telserv - $ZTCN0
• Listener - $LNS0
No TFTP or WANBOOT process is configured for new NonStop systems.
NOTE: Naming conventions or configurations for the dedicated service LAN TCP/IP are the same
as the TCP/IP conventions used with G-series RVUs and are named $ZTCP0 and $ZTCP1.
CAUTION: Do not change the process names for $ZTCP0 and $ZTCP1. Doing so will make some
components inaccessible.
OSM Service Connection provides the location of the resource by adding an identifying suffix to
the names of all the system resources. Other interfaces, such as SCF, also provide means to locate
named resources.
106 System Configuration Guidelines