NonStop NS16000 Series Planning Guide (H06.11+)

6 Hardware Configurations
Minimum and Maximum Hardware Configuration
This table shows the minimum, typical, and maximum number of the modular components installed
in a system. These values might not reflect the system you are planning and are provided only as
an example, not as exact values.
Triplex ProcessorDuplex ProcessorEnclosure or
Component
MaximumMinimumMaximumMinimum
123824-processor NonStop
Blade Element with
16 DIMMs
4863244-GB memory quad
-3-2Processor board with
two 1.6 GHz
processors
12-8-Processor board with
four 1.6 GHz
processors
162162LSU logic board and
optics adapter
2222P-switch
200200CLIMs (see “NonStop
NS16000 Series
System Overview”
(page 19) for details)
1 per modular cabinet1 if IP or Telco CLIMs
in system
1 per modular cabinet1 if IP or Telco CLIMs
in system
CLIM cable
management Ethernet
patch panel
0 if not0 if not
440440SAS disk enclosure
55005500SAS disk drive
6161IOAMs
Up to 60 in mixture set
by disks and I/O
2Up to 60 in mixture set
by disks and I/O
2FCSA
22G4SA
8282Fibre Channel disk
module per FCSA
pair
1121411214Fibre Channel disk
drives per FCSA pair
Enclosure Locations in Cabinets
Each delivery of an Integrity NonStop NS16000 series system or component includes a Technical
Document that describes:
• Each cabinet included with the system
• Each hardware enclosure installed in the cabinet
• Cabinet U location of the bottom edge of each enclosure
Minimum and Maximum Hardware Configuration 135