NonStop NS16000 Series Planning Guide (H06.11+)

Technical Document for the Factory-Installed Hardware Configuration
Each new Integrity NonStop NS16000 series system includes a document called a technical
document. It serves as the physical location and connection map for the system and describes:
• Each cabinet included with the system
• Each hardware enclosure installed in the cabinet
• Cabinet U location of the bottom edge of each enclosure
• Each ServerNet cable with:
Source and destination enclosure, component, and connector◦
◦ Cable part number
◦ Source and destination connection labels
Configuration Forms for CLIMs and ServerNet Adapters
To add configuration forms for ServerNet adapters or CLIMs to your Installation Document Packet,
copy the necessary forms from the adapter manuals or the Cluster I/O Protocols (CIP) Configuration
and Management Manual for the CLIMs to be configured. Follow any planning instructions in these
manuals.
For RVU and SPR requirements for CLIMs, see Table 5 (page 116).
ServerNet Cluster Configuration Form
The configuration form for installing a ServerNet cluster is located in the ServerNet Cluster Manual.
BladeCluster Solution Installation and Migration Tasks
The checklist for installing a BladeCluster Solution is located in the BladeCluster Solution Manual.
System Installation Document Packet 31