NonStop NS16000 Series Planning Guide (H06.11+)

FCSA to Fibre Channel Disk Modules
See “Example Configurations of the IOAM Enclosure and Fibre Channel Disk Module” (page 96).
FCSA to Tape Devices
Fibre Channel tape devices can be connected directly to an FCSA in an IOAM enclosure. Integrity
NonStop NS16000 series systems do not support SCSI buses or adapters to connect tape devices.
However, SCSI tape devices can be connected through a Fibre Channel to SCSI converter device
(model M8201R) that allows connection to SCSI tape drives. For interconnect cable information
and installation instructions, see the M8201R Fibre Channel to SCSI Router Installation and User’s
Guide.
NOTE: To enable OSM to monitor the Fibre Channel to SCSI converter, connect it to the
maintenance switch and provide OSM with its IP address. For instructions, see the M8201R Fibre
Channel to SCSI Router Installation and User’s Guide.
Internal ServerNet Interconnect Cabling 79