NonStop NS16000 Series Planning Guide (H06.11+)

Use only the supported configurations as described below.
Configurations for Storage CLIMs and SAS Disk Enclosures
These subsections show the supported configurations for SAS Disk enclosures with Storage CLIMs:
• “DL385 G2 or G5 Storage CLIM and SAS Disk Enclosure Configurations” (page 83)
• “DL380 G6 Storage CLIM and SAS Disk Enclosure Configurations” (page 85)
DL385 G2 or G5 Storage CLIM and SAS Disk Enclosure Configurations
• “Two DL385 G2 or G5 Storage CLIMs, Two MSA70 SAS Disk Enclosures” (page 83)
• “Four DL385 G2 or G5 Storage CLIMs, Four MSA70 SAS Disk Enclosures” (page 84)
• “Daisy-Chain Configurations (DL385 G2 or G5 Storage CLIMs Only with MSA70 SAS Disk
Enclosures)” (page 84)
Two DL385 G2 or G5 Storage CLIMs, Two MSA70 SAS Disk Enclosures
This illustration shows example cable connections for the two DL385 G2 or G5 Storage CLIM, two
MSA70 SAS disk enclosure configuration:
Figure 15 Two DL385 G2 or G5 Storage CLIMs, Two MSA70 SAS Disk Enclosure Configuration
This table lists the Storage CLIM, LUN, and bay identification for the factory-default system disk
locations in the configuration of two DL385 G2 or G5 Storage CLIMs and two MSA70 SAS disk
enclosures. In this case, $SYSTEM, $DSMSCM, $AUDIT, and OSS are configured as mirrored
SAS disk volumes:
Mirror Disk Location
in Mirror SAS
Enclosure
Primary Disk Bay in
Primary SAS
Enclosure
Mirror LUNPrimary
LUN
Backup and
Mirror CLIM
Primary and
Mirror-Backup
CLIM
Disk Volume
Name
11201101100.2.5.1100.2.4.1$SYSTEM
22202102100.2.5.1100.2.4.1$DSMSCM
33203103100.2.5.1100.2.4.1$AUDIT
44204104100.2.5.1100.2.4.1$OSS
For an illustration of the factory-default slot locations for a SAS disk enclosure, refer to
“Factory-Default Disk Volume Locations for SAS Disk Devices” (page 82).
Storage CLIM Devices 83