NonStop Operations Guide for H-Series and J-Series RVUs

displays partitioning information for HDDs and SSDs. See the SCF Reference Manual for the Storage
Subsystem for more information.
SeeFor information about
NonStop BladeSystem Planning GuideSAS disk drive enclosures and SAS disk drives
Cluster I/O Protocols (CIP) Configuration and Management
Manual
Configuring and managing CLIMs and Cluster I/O Protocol
devices
SCF Reference Manual for the Storage SubsystemSAS disk drive commands
Monitoring Disk Drives
SeeFor information about
Appendix B (page 222)Tools for monitoring status, space use, configuration, and
performance of disk drives
Chapter 5 (page 77)Displaying EMS events generated by storage devices and
subsystems
“Monitoring Disk Drives With OSM” (page 143)Monitoring with OSM
“Monitoring Drives With SCF ” (page 145)Monitoring with SCF
“Using HP SIM” (page 55)Monitoring with HP SIM and its plug-ins
Monitoring Disk Drives With OSM
For SAS disk drives, the physical SAS disk drive and the corresponding logical drive show as two
separate objects in the OSM Service Connection tree pane. The physical disk drives are displayed
under the SAS Disk Enclosures > SAS Disk Enclosure container objects, as shown in Figure 8. The
logical disks are displayed under the CLIM Attached Disks object, as shown in Figure 9 (page 144).
Figure 8 Physical Disk Drives in OSM
Monitoring Disk Drives 143