NonStop Operations Guide for H-Series and J-Series RVUs

SeeTask

• Primary path access state

• Backup path access state

“Using the OSM Service Connection” (page 59)For SAS disks, check both the physical disk (under SAS

Disk Enclosures) and the logical disk (under CLIM Attached

Disks).

For physical disk, determine the Device State.

For logical disk, determine:

• Service state

• Primary path state

• Backup path state

• Primary path access state

• Backup path access state

“Monitoring the State of Disk Drives” (page 148)Check for alarms and degraded attribute values.

For SAS disks, check both the physical disk (under SAS

Disk Enclosures) and the logical disk (under CLIM Attached

Disks) for alarms and degraded attribute values.

Monitoring Drives With SCF

This section explains how to list disk volumes and determine their status.

1. List the status of all magnetic disk volumes on your system, issue this command from SCF:

> STATUS DISK $*, SUB MAGNETIC

1-> STATUS DISK $*, SUB MAGNETIC

STORAGE - Status DISK \COMM.$SYSTEM