NonStop Operations Guide for H-Series and J-Series RVUs

New and Changed Information in 529869–020 Edition
• Changed note about OSM Notification Director and made other changes in “System Consoles”
(page 28).
• Removed OSM Notification Director from lists and made other changes in “Overview of OSM
Applications” (page 29) and “Launching OSM Applications” (page 30).
• Added core licensing to “NonStop BladeSystem Options” (page 33).
• Added link to “NonStop Software Essentials” (page 57) at the beginning of “Overview of
Monitoring and Recovery” (page 51).
• Changed “HP Insight Remote Support Advanced” (page 59).
• Changed “NonStop I/O Essentials” (page 57) and removed list of configuration and control
tasks in the CIP subsystem.
• Changed “NonStop Software Essentials” (page 57).
• Changed last item in Table 12: “Related Reading for Monitoring Information” (page 70).
• Changed “Processors in NonStop Systems Running J-Series RVUs” (page 121).
• Changed Table 23 (page 121) and added paragraph after it about determining or increasing
the number of BladeSystem cores enabled.
• For NonStop NB54000c and NB54000c-cg BladeSystems, added the Physical Cores attribute
and Number of Enabled Cores attribute of the Logical Processor object. in “Monitoring
Processor Status Using the OSM Service Connection” (page 125). Also told how to increase
the number of cores enabled in a processor.
• Changed RVU requirements to support SSDs to H06.24 or later or J06.13 or later in “Serial
Attached SCSI (SAS) Disks and Solid State Drives” (page 142) and added RVU requirement of
H06.23 or later or J06.12 or later to support disk partitioning of SSDs or HDDs.
• Changed titles of references in “Related Reading for Disk Drives” (page 154).
• Changed “NonStop Cluster Essentials” (page 223).
• Changed “CLIM Boot Service Configuration Wizard” to “NonStop Maintenance LAN DHCP
DNS Configuration Wizard” in Appendix B “Tools and Utilities for Operations” (page 222)
and Appendix C “Related Reading for Tools and Utilities” (page 227).
• Changed “NonStop Software Essentials” (page 224).
• Added Down System CLIM Firmware Update Tool and made other changes in Appendix C
“Related Reading for Tools and Utilities” (page 227).
New and Changed Information in 529869–019 Edition
• Under “About This Document” (page 13), changed the text in the second paragraph to
genericize the manuals referred to, since information about NonStop BladeSystems, NS2000,
and NS2200 carrier grade and commercial is combined in their hardware installation manuals.
• Under “Related Information” (page 23), changed text to refer to planning guides for CLIMs,
rather than just for IP CLIMs and Storage CLIMs.
• In Chapter 2 under “NonStop BladeSystems NB50000c, NB50000c-cg, NB54000c,
NB54000c-cg, NB56000c, and NB56000c-cg Modular Hardware Components” (page 32),
changed title and text to add the NB50000c-cg and NB54000c-cg systems.
• In Chapter 2 under “NonStop BladeSystems NB50000c, NB50000c-cg, NB54000c,
NB54000c-cg, NB56000c, and NB56000c-cg Modular Hardware Components” (page 32),
added InfiniBand CLuster I/O Module (IB CLIM).
• In Chapter 2 under “NonStop NS-Series Modular Hardware Components” (page 34), added
InfiniBand CLuster I/O Module (IB CLIM).
New and Changed Information in 529869–020 Edition 15