NonStop Operations Guide for H-Series and J-Series RVUs

Table 34 Related Reading for Starting and Stopping a System (continued)
Refer toFor Information About
OSM Service Connection online helpInforming OSM of the location of an alternate system disk.
See Saving (a disk-level action) or deleting (a system-level
action) alternate system load volumes.
SCF Reference Manual for the Kernel SubsystemAutomating the startup of objects and devices using generic
processes
SCF Reference Manual for the Storage SubsystemStarting storage devices such as disks and tape drives
SCF or configuration manual specific to each type of
communications device or line
Starting and stopping communications devices and
communications lines
The Configuration and Management manual for the
communication subsystem for the terminal or printer
Starting Ethernet addressable devices, including terminals
and printers
WAN Subsystem Configuration and Management Manual,
as well as the SCF manuals that apply to the specific
devices and communications protocols
Starting WAN communications lines for devices and
intersystem communications protocols
Chapter 18 (page 199) and DSM/SCM User’s Guide for
information on the CONFTEXT file CIIN entry
Configuring the CIIN file
DSM/SCM User’s GuideShutting down DSM/SCM
TMF Operations and Recovery GuideStarting up and shutting down TMF
Pathway/iTS System Management Manual and TS/MP
System Management Manual
Starting and shutting down the Pathway environment
Spooler Utilities Reference ManualDraining the spooler
Cluster I/O Protocols (CIP) Configuration and Management
Manual
Starting and stopping CLIMs and the CIP subsystem
HP BladeSystem Onboard Administrator User GuideUsing the Onboard Administrator (OA)
198 Starting and Stopping the System