NonStop Operations Guide for H-Series and J-Series RVUs

$ZZKRN 0,298 180 P 011 255,255 $SYSTEM.SYS14.OZKRN $ZHOME
$Z000 0,299 180 P 011 255,255 $SYSTEM.SYS14.TZSTOSRV $ZHOME
$ZLM00 0,300 200 P 015 255,255 $SYSTEM.SYS14.LANMON $ZHOME
$IXPOHO 0,301 199 P 355 255,255 $SYSTEM.SYS14.LHOBJ $ZHOME
$ZTXAE 0,330 145 015 255,255 $SYSTEM.SYS14.SNMPTMUX $ZHOME
$ZWBAF 0,333 179 P 015 255,255 $SYSTEM.SYS14.WANBOOT $ZHOME
$ZZW00 0,334 199 P 215 255,255 $SYSTEM.SYS14.CONMGR $ZHOME
$DSMSCM 0,335 220 P 317 255,255 $SYSTEM.SYS14.TSYSDP2 $ZHOME
$DATA2 0,336 220 P 317 255,255 $SYSTEM.SYS14.TSYSDP2 $ZHOME
$ZLOG 0,340 150 011 255,255 $SYSTEM.SYS14.EMSACOLL $ZHOME
$ZTH00 0,343 148 P 005 255,255 $SYSTEM.SYS14.TFDSHLP $YMIOP.#CLCI
$DSMSCM 0,344 220 P 317 255,255 $SYSTEM.SYS14.TSYSDP2 $ZHOME
$Z1RM 1,80 148 005 255,255 $SYSTEM.SYS14.TACL $ZTNT.#PTBY5D
$ZPP01 1,280 160 P 015 255,255 $SYSTEM.SYS14.OSSPS $YMIOP.#CLCI
Monitoring IOPs
For a list of manuals that provide more information about monitoring I/O processes (IOPs), refer
to the WAN Subsystem Configuration and Management Manual, the SWAN Concentrator and
WAN Subsystem Troubleshooting Guide, and the Expand Configuration and Management Manual.
Monitoring CIP Processes
For information about monitoring CIP processes, refer to the Cluster I/O Protocols (CIP) Configuration
and Management Manual.
Monitoring Generic Processes
Because generic processes are configured using the SCF interface to the Kernel subsystem, you
specify the $ZZKRN Kernel subsystem manager process when monitoring a generic process. These
SCF commands are available for monitoring $ZZKRN and other generic processes:
Displays configuration information for the specified objectsINFO
Displays a list of subordinate object types and names for
the specified objects
NAMES
Displays current status information about the specified
objects
STATUS
Monitoring the Status of $ZZKRN
To monitor the status of the $ZZKRN Kernel subsystem manager process, at a TACL prompt:
> SCF STATUS SUBSYS $ZZKRN
This example shows the output produced by this command:
1 -> STATUS SUBSYS $ZZKRN
NONSTOP KERNEL - Status SUBSYS \COMM.$ZZKRN
Name State Processes
(conf/strd)
\COMM.$ZZKRN STARTED ( 25/22 )
Monitoring the Status of All Generic Processes
To monitor the status of all generic processes controlled by $ZZKRN, at a TACL prompt:
> SCF STATUS PROCESS $ZZKRN.#*
This example shows the output produced by this command:
1-> STATUS PROCESS $ZZKRN.#*
82 Processes: Monitoring and Recovery