NonStop Operations Guide for H-Series and J-Series RVUs

Recovery Operations for Processes

For recovery operations on generic processes, use the SCF interface to the Kernel subsystem and

specify the PROCESS object. These SCF commands are available for controlling generic processes:

Terminates operation of a generic process. This command

is not supported for the subsystem manager processes.

ABORT

Initiates the operation of a generic process.START

Generic processes that are configured to be persistent usually do not require operator intervention

for recovery. In most circumstances, persistent generic processes restart automatically.

For recovery operations on IOPs, refer to the WAN Subsystem Configuration and Management

Manual, the SWAN Concentrator and WAN Subsystem Troubleshooting Guide, and the Expand

Configuration and Management Manual.

For recovery operations on system processes, refer to the Guardian User’s Guide.

For recovery operations on CIP processes, refer to the Cluster I/O Protocols (CIP) Configuration

and Management Manual.