Manualshelf

NonStop Operations Guide for H-Series and J-Series RVUs

ManualsBrandsHP ManualsServerHP Integrity NonStop H-Series
919293949596979899100
To check the status of a line-handler process on your system:
> SCF STATUS LINE $line
A listing similar to this example is sent to your home terminal:
1-> STATUS LINE $LHPLIN1
EXPAND Status LINE
Name State PPID BPID ConMgr-LDEV
$LHCS6S STARTED 1, 20 2,25 49
This listing shows that the Expand line-handler process being monitored is up and functioning
normally.
The data shown in the report means:
Specifies the name of the objectName
Indicates the summary state of the object, which is either
STARTED, STARTING, DIAGNOSING (for SWAN
concentrators only), or STOPPED
State
Specifies the primary process IDPPID
Specifies the backup process IDBPID
Contains the LDEV of the concentrator manager process.
This field applies only to SWAN concentrator lines.
ConMgr-LDEV
If any state other than STARTED appears, check the meaning of the state in “SCF Object States”
(page 62). Depending upon the type of problem, follow your established procedures for problem
reporting and escalation.
Examples
To check the detailed status of line $LHCS6S:
> SCF STATUS LINE $LHCS6S, DETAIL
A listing such as this output is sent to your home terminal:
-> STATUS LINE $LHCS6S, DETAIL
PPID.................... ( 3, 24) BPID................ ( 2, 24)
State................... STOPPED Path LDEV........... 50
Trace Status............ OFF Clip Status......... UNLOADED
ConMgr-LDEV............. 49
Path-prim
Path-alter
To display the status of all the Expand lines that are currently active on your system, enter this INFO
PROCESS command for the Expand manager process $NCP:
-> INFO PROCESS $NCP, LINESET
The system displays a listing similar to this output. The NEIGHBOR field displays the system to
which a given line connects, and the STATUS field indicates whether the line is up:
1-> INFO PROCESS $NCP, LINESET
EXPAND Info PROCESS $NCP , LINESET
LINESETS AT \COMM (116) #LINESETS=35 TIME: JUL 9,2001 19:28:04
LINESET NEIGHBOR LDEV TF PID LINE LDEV STATUS FileErr#
Monitoring Communications Subsystems and Their Objects 97