NonStop Servlets for JavaServer Pages (NSJSP) 7.0 System Administrator's Guide

Managing NSJSP
NonStop Servlets for JavaServer Pages (NSJSP) 7.0 System Administrator’s Guide—674372-005
4-47
NSJSP Manager Operations
Viewing Configuration Parameters
The server class configuration parameters are used during initialization. The
parameters that are displayed using the NSJSP Manager Application are defined in the
servlet.config file. However, some of the parameters are displayed with their
default values and are not required to be explicitly set. For example, the
AUTORESTART parameter is shown with the default value of 3 and is not mentioned in
the servlet.config file. For more information on the server class configuration
parameters and their values, see the TS/MP System Management Manual.
To view the parameters that are used to deploy NSJSP processes, complete the
following steps:
1. Click the Server Class tab.
2. Click Configuration Parameters.
The Configuration Parameters page appears. Figure 4-24 shows a sample
Configuration Parameters page.
Table 4-19
lists the GUI server class configuration parameters.
Figure 4-24. Configuration Parameters Page